The Neunaber Immerse Reverberator Mk II stereo reverb pedal raises the bar with eight rich stereo reverbs in one easy to use unit. No user manual is required. Experience studio-quality tone that can be used with instruments of all stripes.

Connect stereo outputs for a huge, immersive sounding reverb. Want to change it up and plug into a single amp? Immerse will sum a stereo input to mono with only output 1 connected. Your dry signal remains analog for low noise and zero latency. Use a standard 9V or 12V pedal power supply (sold separately). Or, connect the Immerse Reverberator MkII to a 100mA output on a brick supply.

Features
* High-quality buffered bypass, perfect for placing at the end of the signal chain
* Trails switch
* Kill Dry switch for parallel effect loops
* Inputs/outputs can be used mono (#1) or stereo (#1 and #2)
* Analog dry signal for low noise and zero latency
* Small, pedalboard-friendly footprint
* Requires standard 9V pedal power supply (not included)
* Designed and manufactured in California

Specs

Immerse Reverberator Mk II Stereo Reverb Effects Pedal Specifications:

Electrical
* Input level: Instrument/consumer line level
* Input impedance: 1 mohm
* Frequency response: 20Hz?30kHz
* Total harmonic distortion:
Power
* Input: 9?12V DC, 100mA
* Connector: Center-negative, 5.5 mm OD x 2.1 mm ID

Physical
* Dimensions: 2.6' x 4.6' x 1.9' (63 mm x 115 mm x 46 mm)
* Weight: 6.7 oz. (190 g)

PROD번호 : 10042884
정보업데이트 : CV.57369 : 2025-03-26 오후 8:06:22